super high pressure high pressure nitrogen hose 6000 psi

Parker Parflex Ultra High Pressure Hoses, Hydraulic, PTFE

High Pressure Hose. Parker Parflex provides the best ultra high pressure hoses and fittings to fill the needs of market segments that require high pressures between 10,000 psi and 60,000 psi, such as water blast and water jetting technologies. In testing, the TOUGHJACKET waterblast hoses, with an extreme abrasion resistant cover, withstand 650x

High Pressure Valves and System Brochure

6000 PSI Gas Storage Cylinder Page 4—5 10- 12- 14 15 15 15 11 13 . STAINLESS STEEL CHECK VALVES Semi-soft means the check ball or poppet initially seats on the PTFE, but after the PTFE deflects a slight amount, the ball or poppet comes to rest against the metal seat so the PTFE does not have to absorb the full load of the high pressure. Internal passages have flow capacity equal to or

High Pressure Smooth Bore PTFE Hose (5000 psi) by Senior

High pressure smooth bore PTFE hose (5000 PSI) is used in a variety of appliions, such as hydraulics, compressed gases, R.I.M. (reaction injection molding machines), urethane transfer and hot melt glue. Series HP hose has a conductive PTFE core with a single layer of stainless steel wire braid in the smaller diameters.

Paintball/Airgun Storage Regulator 6000 psi In CGA 677

Inlet pressure of 6000 psi. Outlet pressure 0-5000 psi. Equipped with wrench-tight CGA 677 nut and nipple. Equipped with two 2.5 in 10,000 psi pressure gauges; one reads storage pressure and one reads regulated pressure. The model 415 is a piston type, hand load regulator that uses an unbalanced poppet design for ruggedness and simplicity. There is a small variation of control pressure with

Adjustable Regulator 0-6000 PSI - August Industries Inc.

2/3/2019· The most widely used regulator on the market. Economical and Rugged. This regulator is designed to reduce high pressure input air up to 6,000 PSI down to an adjustable lower pressure of 1,000 to 6,000 PSI. This regulator is designed with 1/4 NPT inlet and outlet, as well as two gauge ports for indiing the inlet and outlet pressures.

Compressed Gas Hose - Specialty Hose Corporation

Maximum Working Pressure: • Up to 6000 PSI at 70° F. The recommended hose assely for high pressure helium or hydrogen. Unlike high pressure PTFE asselies, gas will not permeate the wall of this stainless metal hose assely. CERTIFIED WELDING . SECTION IX ANSI B31.1 / B31.3. AWS D17.1 • • • • • • • • • • • • • • • • • • • SPECIALTY HOSE

Ninja High Pressure Fill Station for PCP Airguns | Air

Key Features of the Ninja High Pressure Fill Station. Output Pressure: 500psi up to 5000psi (depending on what you set it to) Designed to be used with large tanks ie: High Pressure Nitrogen (HPN), High Pressure Air (HPA) Setting the regulator output pressure can prevent overfilling airguns or smaller tanks. Use this regulator to fill smaller

Model 8700 | The Harris Products Group

Description: Ultra High Delivery Pressure Regulator. The Model GP 8700 is a single stage high pressure regulator that is designed to operate on high pressure cylinders up to 7500 PSIG. Typical Appliion: Ultra High Pressure High pressure testing Charging accumulators Pressurizing aircraft struts. DETAILS TECHNICAL RESOURCES Features: 0-1500, 2500, 3000, 4500 and 6000 PSIG …

6000 PSI Nitrogen | Products & Suppliers | Engineering360

Atlas Copco Compressors Nitrogen Generators It''s Time to Ditch the Bottle. If your business is a regular consumer of nitrogen, you ''re likely aware of what a hassle nitrogen tank rental and delivery can present. Those bulky nitrogen cylinders take up a lot of floor space in your facility, and being such heavy vessels containing gas under high pressure, they amount to an ever-present safety risk.

Buy Tronair K-3706 High Pressure Nitrogen Valve Adapter

The K-3706 is a high-pressure hose coupling for nitrogen servicing and used with some aircraft nitrogen regulators. Specifiions; Thread .305-32 to -04 JIC Flare : Description/Purpose: High Pressure Connector - high pressure valve connector : Max Pressure: 5000 (344.7) psi (bar) Shipping Information; Pkg. 1 Weight: 1 lbs. Pkg. 1 Dimensions: 11 in. x 7 in. x 6 in. Pkg. 1 Type: Carton: Freight

UN/ISO Air Storage Tank: 587 cu ft, 6000 psi | Nuvair

Steel 6000 psi (414 bar), 586.6 cu ft (16.61 m³) air storage tank. Ultrasonic tested, leak-before-break, cylinder for horizontal or vertical use in vehicles.

Stainless Steel High-Pressure Pipe Fittings | McMaster-Carr

Choose from our selection of stainless steel high-pressure pipe fittings, including over 3,300 products in a wide range of styles and sizes. In stock and ready to ship.

Aircraft 1-Bottle Low Pressure Nitrogen Regulator System

Compares to Tronair 0-500 Low Pressure Nitrogen Regulator Hose Asselies, part nuers K-2106, 14-6808-6000, 14-6885-6000, 18-4216-6000, PC-1089-01. Note: For customers outside North America, AERO Specialties supplies a standard CGA bottle connector that will connect to a North American gas cylinder. Customers outside North America must provide their local gas cylinder connection …

Hydraulic Constant Working Pressure Hose 6000 PSI

Parker’s 797 hose, within the GlobalCore product line, was designed to deliver consistency and reliability with a constant working pressure of 6,000 PSI in all sizes. The 797 hose is made with Compact Spiral technology making it light, durable, and easily bent making installation easier and quicker. The 797 hose is designed, built and tested to the ISO 18752 performance specifiions. Sizes

Tronair® 18-4201-1010 High Pressure Nitrogen Gas Booster

27 x 23 x 21 inches. Color. Blue. The Tronair 18-4201-1010 Nitrogen Booster has a max output of 4000 psi, is 20 inches long, 20 inches wide, and 15 inches high. It weighs 45 lbs. Semi-Manual - 18-4200-1100. Mounts on standard nitrogen bottles with CGA-580 connector. 10 cfm (4.7 lps) at 90 psi (6.2 bar) shop air required.


with a pressure higher than 6000 PSI. Connects to a maximum 6000 PSI nitrogen tank with a CGA 677 connection. It is highly recommended that a N 2 gas regulator be used while charging any accumulator. Use dry nitrogen gas (N 2) only. ALSO AVAILABLE: • Complete accumulator repair kits • N 2 gas regulators • Special order C&G kits with different connections and different hose lengths FULL

Thermoplastic Air Hose & Optional Fittings: 5000 psi Rated

High-pressure thermoplastic air hose with optional fittings installed. 5000 psi (345 bar) working pressure and is commonly used for breathing air. Diameter: 1/4 in. Includes steel or stainless steel #4 JIC swivel fittings (as pictured below under "Other Products You Might Like") unless otherwise noted. 1/4 in MNPT fittings available by request. We custom make the 5000 psi (345 bar


High Pressure Hose$5.00 Per Foot, Please indie"quantity in feet" when entering product.Example: Add "10"to basket for a 10'' foot length of hose.Example: Add "175" to basket for a 175'' foot length of hose.We stock Parker thermoplastic 6000 PSI, ultra-flexible 3/16" I.D. high pressure hose. Available in any continuous length up to 250 feet. Hose is ordered by the foot, and both hose ends

Hose for high pressure washing equipment - ENVIROSPEC

High-pressure hose is constructed of an outer cover, one or more layers of metal braid, and an inner tube. The pressures are available in a range of working pressure ratings. The most common pressure ratings for the pressure wash industry are 3000, 4000, 4500, and 5000 psi. They are measured at the inner diameter. Industry standard is 3/8″, which means the opening that water travels through

Products - MAXIMATOR Australia - High Pressure Components

The technologies include the injection of gas or water at high pressure into plastic in an injection mold. The cored-out sections of the part create hollow areas which serve to reduce mass and lower part weight. This in turn, reduces cycle time, adds strength and rigidity, improves cosmetic appearance, and improves dimension stability. View products. Dead Weight Testers 0-7000Bar. Aremeca Dead

High Pressure Hose | Australia & New Zealand

Ultra High Pressure Waterblast Hose - 55,000 psi - 2849D. Parker 2849D Hoses are developed for ultra high pressure water jet cutting equipment with water or with abrasive additives. 1 Part Viewing 10 of 1 Show More . Close. Black Eagle Hose with ColorGard™ Oilfield service hose. Also used as fracing hose alternative to iron pipe (up to 70% lighter). Handles pressures up to 15,000 psi. 7

6000 psi Ultra High Pressure Smooth Bore Hose by Senior

UHP – Ultra High Pressure Smooth Bore Hose. UHP – Ultra high pressure smooth bore PTFE hose (6000 psi) is used in the same appliions as our lower pressure series, but when a higher-pressure rating is required. Ultra high pressure smooth bore PTFE hose has a conductive PTFE core surrounded by two layers of stainless steel wire braid.

SAE 100R15 Hydraulic Hose 6000 Psi Constant Pressure

SAE 100R15 Hydraulic Hose for 5,000 & 6,000 psi service reducing inventory & budget. SAE 100R15 high pressure hydraulic hose is reinforced by four & six alternating layers of spiral and high-tensile steel wire. 6,000 psi constant working pressure and high impulse strength make it very popular in logging, construction/mining, agriculture and oil field equipment.

Gas Pressure Regulators | McMaster-Carr

High-Purity Tank-MountPressure-Regulating Valves for Fuel Gases. Designed to reduce contaminants in high-purity appliions using hydrogen and methane gas, these valves have a stainless steel and brass body with a smooth finish to reduce dust collection and internal components designed to protect the seal and diaphragm from contamination.

Pressure Wash Hose - Flextral - Hydraulic and Industrial

Pressure wash equipment. UltraJet4000 Oil Resistant Pressure Washer. Pressure Wash equipment where maximum abrasion or oil/fat resistantance is required. SuperJet6000. 6000 PSI Pressure Washer. Pressure wash equipment. WB40. Aqua-Boss Water Blast Hose. A very high-constant pressure hose for water scaling systems.

Pressure Washer Super Max 6000 | Daimer Industries

The Super Max™ 6000 is one of the lowest pressure models in Daimer''s line of heavy-duty, wet steam, industrial pressure washers. It is designed to powerfully clean and remove grease and grime with minimal water consumption. Pressure level: 750 PSI. Flow Rate: 1.4 GPM. Heating Method: Propane. Temperature: Up to 330ºF. Power: 120V Electric Motor.

High Pressure Nitrogen Hoses - Newbow Aerospace

High Pressure Nitrogen Hose, 6000 psi Rated, 10-Meter . ITEM PART NUER . NB3503-‘X’MH . NITROGEN HOSE TYPE . Any Length Available, Please Replace ‘X’ With Length Of Hose . ITEM PART NUER . NB70090 . NITROGEN HOSE TYPE . 600mm Hose With End Coil-Over (Fitted to N2 Carts) REQUEST A QUOTE . Please fill out the form below to make an enquiry for this product and we''ll get …


High Flow Rates - Low coefficient of friction with anti-stick properties insures continuous lower pressure drop during service with a good pressure rating and full vacuum. Light Weight - Easier to move, handle, and install than rubber hose with a comparable burst pressure rating - ideal as pigtail in gas handling and pneumatic systems

Bromic High Pressure (HP) Nitrogen Regulator

This High Pressure Nitrogen Regulator is constructed by machined brass and is precision engineered to offer trade quality for use in purging of HVAC systems. This nitrogen regulator comes with a 5 year warranty. Forged brass body for trade durability Sintered metal inlet filter to trap impurities No soldered joints for easy maintenance Factory set maximum delivery pressure Durable and precise

Steel High-Pressure Pipe Fittings | McMaster-Carr

Use in high-pressure appliions up to 6, 000 psi. Iron and Steel Unthreaded Pipe and Pipe Fittings Pipe and fittings weld together for a permanent connection that is stronger and less likely to leak than threaded and clamp-on connections.