high temp hose exhaust assy

High Temperature Ventilation Hose-

Ecoosi clamped high temperature ventilation air duct hose is ideal used in fume exhaust appliions that handle high tempreature working environment. This high temperature ducting hose could handle working temperature range from -30° to 300°(℃ ). Ecoosi clamped high temperature ventilation air duct hose size range from 50mm to 550mm


hose assely to the inlet on the LH radiator tank. The high-temperature thermostat housing is connected to this coolant cir-cuit at the RH tank of the radiator. When the system is cold, the high-temperature thermostat is closed and diverts some of the coolant ow from the water pump and sends it directly to the transmission oil cooler and


High Temp. 2 wire hose High pressure hose for hydraulic fluids and aqueous emulsions and water As above but high temperature rubber formulation. Blue cover 22 HT2 Two wire braid High pressure hose for hydraulic fluids, aqueous emulsions, water and air Similar to R2AT but has increased flexibility, high temperature and also conveys air 23 JH70 Jacking Hose High pressure hydraulic hose for

Engine Exhaust Fumes | Masterduct Products

EXHAUST GAS HOSE FOR TEMPERATURES UP TO +570°F FOR DIESEL ENGINE EXHAUST FUME EXTRACTION. Hose material: Hose wall double layered. Inner wall: heat resistant impregnated glass fabric, Outer wall: special coated high temperature fabric. Spiral material: Galvanized steel with additional plastic abrasion protector.

High Temperature Hoses | Parker NA

Parker’s high temperature hydraulic hose products deliver dependable performance across industries and jobsites. Engineered to perform in high heat, high impulse hydraulic appliions, these heat-resistant hose products are used in transportation, industrial, and multipurpose appliions. Specific industries include oil and gas, mining, construction, and manufacturing. PSI ranges vary by

Ezi-Duct - Flexible Ducting Australia

For use on Vehicle Exhaust Hose Reel, removal of vehicle exhaust, hot gasses, vapours, smoke, dust, powders, fibres. Working Temperature Range:-40°C to 200°C Slightly higher when correctly applied with exhaust gas funnels and sufficient fresh air supply 50% approx. Construction Material: EPDM + polyamide helix with a EPDM coated fabric. The

Master Clip HT 450 (Heat Protective Hose, 2 Layers

This High-Temperature Exhaust Hose highly flexible and flame retardant; it is good for high-temperature engine exhaust gases, up to a constant maximum temperature of 450ºC, in various industries: • 2 ply special coated high-temperature fabric ducting • External galvanised steel helix. Appliions • defence systems (military) • extraction of high-temperature engine exhaust gases in

High Temperature – Flexaust

High-temperature hoses are made from a variety of materials, each of which offers a different degree of flexibility and suitability for different appliions. We accommodate the following hose material requests: • Thermoplastic rubber (TPR). High temp thermoplastic rubber hose demonstrates the material properties of both plastic and rubber. As such, it is lightweight but durable and

Marine Silicone Exhaust & Coolant Hose

Marine Silicone Exhaust & Coolant Hose - MRS. Silicone rubber will remain flexible and ageless after prolonged exposure to extreme temperatures, weather, or ozone - it will stay soft and pliable after years of use as compared to traditional rubber which will harden and crack. Silicone rubber is not for use with oil, however it will stand up to engine oil "mist" found in normal operating

High Temperature Hoses | Industry Update Manufacturing Media

13/8/2013· Gates high-temperature hoses can withstand temperatures from 121° C to more than 149° C, making them the ideal choice for high-pressure hydraulic appliions. Temperature & Saftey The Gates Hydraulic Safety and Preventive Maintenance Program: helps you cut costs and prevent injuries from hydraulic assely failures. It''s free information for maintenance managers, repair technicians …

High Temp Emissions Hoses (2-pack)-46019 - The Home Depot

High heat resistance, robust rubber, and a double-layer design ensure that Dorman''s EGR Pressure Feedback Hose recirculates exhaust gas instead of letting it seep into your car-or the environment. Flexible fiberglass strands reinforce the hose and protect it from collapsing, brittleness, and over-expansion. Help keep your check engine light off and your car passing inspection, every time. All

: Walker 36344 High Temperature Exhaust Hose

BLACKHORSE-RACING 1" ID High Temp Silicone Exhaust Pipe + Hose Clamps Kit Compatible with 1987-2006 Yamaha Blaster YFS200 ATV Black. 4.2 out of 5 stars 80. 2 offers from $10.19. Permatex 80335 Muffler and Tailpipe Sealer, 3 oz. 4.4 out of 5 stars 3,623. 26 offers from $4.43. 1 inch Stainless Steel Exhaust Pipe Parking Air Heater Fuel Tank Diesel Gas Vent Hose Length 78 Inch. 4.2 out of 5 …

600°F High Temperature Silicone Air Duct Hose | Global

High Temp Silicone Duct Hose is designed for temperatures up to 600° F and for medium pressure handling of air, dust, fumes, and light powders. Available in 2 Ply and sizes from 1" dia. to 12" dia. Silicone is resistant to hardening, cracking, ozone attack, sunlight, moisture, steam, dust, aging, various pressure ranges and to many chemicals too.


Hoses are available in 3 ft, 5 ft, and 8 ft lengths. Custom lengths are also available by request. Weld-on extensions will need to have the tip of the extension welded over the exhaust flange. The extension hose will still be able to be removed, either with a quick disconnect, or by unthreading the hose from the tip. Universal weld-on designs: Up to Ø11/16” (17.5mm) X 3/4” (19mm) long


High Temperature Type HTC The exhaust hose shall be fabried of silicone coated glass fabric inner layer and silicone coated nomex outer layer, clinched within an external galvanized steel helix. No adhesives may be used in the construction. The flexible hose is to be capable of withstanding temperatures of 1000°F interior, and be both flame retardant and oil resistant. Exhaust adapters

Hose Shop | Hoses - Our Products

Chem. Chart • Temp/Pressure. Agricultural Spray Hose. PVC • (ID) 8mm − 25mm (W/P) 600psi. Chem. Chart • Temp/Pressure. Airline Hose - 40 Bar. PVC • (ID) 10mm − 25mm. Chem. Chart • Temp/Pressure. Non-Toxic Pressure Flex. PVC • (ID) 6mm − 50mm (W/P) 363psi − 87psi. Chem. Chart • Temp/Pressure. Petrol Resistant Pressure Flex. PVC • (ID) 8mm − 50mm (W/P) 315psi − 100psi

High temp hose oil assyHydroscand Automotive

Hydraulic/oil hose assy ; Fuel hose assy ; High temp hose oil assy ; Coolant hose assy ; Fittings and adaptors ; Exhaust pipe insulation ; Pipe fittings ; Tubes ; Tube-hose coines ; Power steering hoses ; Air break hose/tube ; Product alogue ; Services . Design & Test Centre ; Special Hoses ; About Hydroscand . Quality and environment

Rubber Hose, Industrial PVC, Hose & Tubing | ENZED - Australia

MIN40 Miniera 40 Steel Air. 7281. Hot Air Blower with Wire Helix Hardwall. 9388. Hot Air Blower with Wire Helix Softwall. 7174. Farm Pump Hose. 7280. Flex-Ever™ 2000 Gasoline Pump Hose.

Industrial Hoses from Flexicraft

FD1 HIGH TEMP. DUCT . FD1 is a top quality rubber duct hose for high temperature air flow and fume removal. A two-ply fiberglass, coated with silicone gives a rating of 500 deg F, and the smooth bore allows for maximum air flow. 3/4" to 12" diameters. -75F to 500F.

Industrial Hoses – Flexaust

At Flexaust, we provide a broad selection of durable and reliable flexible hose solutions ideal for use in chemical fume extraction, dust collection, material handling, ventilation, and high-temperature appliions. We manufacture flexible hoses made from a variety of materials. Industries we serve include agriculture, dust collection, food and beverage processing, high-temperature operations

Exhaust Hose | McMaster-Carr

Choose from our selection of exhaust hose, including high-temperature flexible duct hose, high-temperature rigid metal duct hose, and more. In stock and ready to ship.

Approved Marine Wet Exhaust Hose - ASAP Supplies

Inside is finished smooth NBR rubber. Suitable for exhaust temperature ranges -25°C to +120°C. The Seaflow marine exhaust hose is designed for wet exhaust appliions, such as boat exhausts. The special construction means that the wet exhaust hose is not only tough but also extremely flexible to help make the installation as easy as possible


High temperature hose construction is common for diesel and larger engine exhaust appliions. For specialty appliions such as dynamo-meter or engine testing, Ventaire offers hoses with temperature rating exceeding 2000°F. Contact Ventaire to assist with hose selection and sizing for your specific appliion. FEATURES: Fabric, rubber (crush proof), or steel construction. Fabric hose

High Temperature Vehicle Exhaust Extraction Hose

Our high temperature vehicle exhaust extraction hose is designed for withstanding extreme temperatures up to 1100°C. The Masterflex HT1100 is used on large plant machinery or military exhaust extraction systems. The 3-ply special coated high temperature fabric is reinforced with an external stainless steel helix that protects the hose against abrasion and scuffing.

Flexible Silicone Hose - High Temperature - 63 mm Diameter

Flexible Silicone Hose - High Temperature – 63 mm Diameter – 400 cm Length The flexible silicone hose is semi-rigid with a 63 mm diameter and a length of 400 cm. The working temperature is -60°C – 300°C. Function The hose (silicone) circulates air through the length of the ducting, and the material can be twisted and still holds it shape to maintain airflow. The silicone duct is heat

Silicone Joiners & Hoses — Goleby''s Parts

Condition: Brand new Description: Straight silicone hose reducer black Other Information: 76mm long. from $14.95. Quick shop. Choose options. from $15.95. Goleby''s Parts 90 Degree Hi Temp Silicone Elbow. Condition: Brand new Description: Hi Temp Black Silicone 90 Degree Elbow. from $15.95.

: high temp hose

FLEXFAB 3/4" X 5'' Blue Silicone High Temperature Heater Hose 5526 (Made in USA) 4.5 out of 5 stars 42. $36.89 $ 36. 89. Get it as soon as Tue, Nov 9. FREE Shipping . HPS Performance 3/8" ID Blue high Temp Reinforced Silicone Heater Hose 10 feet roll, Max Working Pressure 80 psi, Max Temperature Rating: 350F, Bend Radius: 1-1/2" (HTHH-038-BLUEx10) 4.9 out of 5 stars 32. $38.20 $ 38. 20. Get it

High Temperature & High Pressure Hose - MSC Industrial Supply

High Temperature & High Pressure Hose; Inside Diameter (Inch): 5/8 ; Material: Rubber ; Length (Feet): 100 ; Maximum Pressure (psi): 125 ; Minimum Temperature (F): -40 ; Maximum Temperature

High Temperature Coolant Hose Assely | ® Parts Store

High Temperature Coolant Hose Assely. Retrieving Price.. Was. , includes GST *. , excludes GST *. Contact Us. Contact Us about this item. Core Deposit. Purchase of this product requires an additional deposit that is refundable when you return the old core to the selling erpillar dealer.

High Temperature Hose & Ducting

At Ducting, we have a large selection of high temperature hose that is designed for long-term use and durability when exposed to elevated temperatures. The most important distinction that must be made is the determination of the maximum temperature to which a hose is exposed. This includes the media being moved through the flex duct, as well as the temperature in and around the machinery